Install the Diesel Fuel-Line Fuel Saver
|
Please locate the fuel feed line first. Then, use the supplied clamps and cable ties to attach the Fuel-Line Fuel Saver. Make sure to install the Fuel-Line Fuel Saver near the engine for better result.
|
 |
|
Install the Air Fuel Saver
|
Install the Air Fuel Saver into the air intake cube or inside the air filter housing. It is mounted on the pre-filtered (before the air is filtered) area of the air filter. Please find a suitable location to attach the Air Fuel Saver. You may also use the supplied cable tie to secure it. |
|
 |
| |
Install the Water Fuel Saver |
Use the supplied clamps and cable ties to attach the Water Fuel Saver onto the radiator hose. |
 |
| |
Install the Moletech Fuel Saver |
Warning
Gasoline is a hazardous substance and must be handled with extreme care. We strongly recommended our customer could perform this installation in the professional maintenance store.
NOTE
During the trial or money back guarantee period , please ˇ§DO NOT install the Moletech tank fuel saverˇ¨. After you satisfied the results and decided not to have a refund, you can go to the closest professional maintenance store to install the Moletech fuel saver and receive the optimum benefit of Moletech fuel saver.
|
There are three (3) ways to install the Moletech Fuel Saver. The workshop or mechanic will need to identify the most suitable installation procedures:
|
1. Though the sender or fuel pump via access plate. An access plate is usually in the boot or under the back seat.
NOTE
Generally, most vehicle manufacturers recommend a new gasket be installed when carrying out this process. |
|
2. Though the Neck of the tank by removing the anti-siphon. |
|
3. Though the sender or fuel pump by removing the tank.
NOTE
This method is only used if your vehicle can not be installed by the previous methods. |
|
|
