Install the Air Fuel Saver
|
Install the Air Fuel Saver into the air intake cube or inside the air filter housing. It is mounted on the pre-filtered (before the air is filtered) area of the air filter. Please find a suitable location to attach the Air Fuel Saver. You may also use the supplied cable tie to secure it. |
|
 |
| |
Install the Water Fuel Saver |
Use the supplied clamps and cable ties to attach the Water Fuel Saver onto the radiator hose. |
 |
| |
Install the Moletech Fuel Saver |
Warning
Gasoline is a hazardous substance and must be handled with extreme care. We strongly recommended our customer could perform this installation in the professional maintenance store.
|
There are three (3) ways to install the Moletech Fuel Saver. The workshop or mechanic will need to identify the most suitable installation procedures:
|
1. Though the sender or fuel pump via access plate. An access plate is usually in the boot or under the back seat.
NOTE
Generally, most vehicle manufacturers recommend a new gasket be installed when carrying out this process. |
|
2. Though the Neck of the tank by removing the anti-siphon.
|
|
3. Though the sender or fuel pump by removing the tank.
NOTE
This method is only used if your vehicle can not be installed by the previous methods. |
|
|
